Neverin station network

Connect your station to Neverin

Add your station through your profile, in just a few minutes of work.

Add a station in the profile Create an account and add a station For integrators

Free. You get the sending key at once; we approve the station as soon as we can after the first data.

How it works

Three steps

An account

Create a Neverin account and verify your e-mail address. The profile has a My stations section.

Add the station

The name, a point on the map, the elevation and your device. You get the sending key and the settings at once.

Connect the station

Enter the settings in your station's app or software. In your profile, check within two minutes whether the data arrive. After the first data we review the station and publish it as soon as we can.

Devices and software

Which stations can I connect?

Almost every model of the Ecowitt family, Bresser and Davis, and any station already sent by Meteobridge, Cumulus MX, WeeWX or Weather Display.

Ecowitt family

almost every model

Froggit, GoGEN, Misol, Waldbeck, Garni, Sainlogic, Fine Offset and Ambient Weather: the same devices under other names, with a Wi-Fi gateway or console.

Sends by itself: a Customized server in the Ecowitt, WS View Plus or awnet app, the Ecowitt protocol with every sensor.

Bresser

almost every model

Models with a Wi-Fi console run by the ClearView or WSLink app.

Sends by itself: 'Other server' in the app, the WUnderground API format.

Davis

every model

Vantage Vue and Vantage Pro2 with WeatherLink Live, the WeatherLink console or another WeatherLink uploader.

Through the WeatherLink network: you share the station with Neverin, the instructions are in the profile.

Have another station? If one of these programs already runs it, it sends to Neverin too.

MeteobridgeCumulus MXWeeWXWeather DisplayYour own script or other software

No station yet? Write to us at [email protected] before you buy: we advise which model and equipment suit your location and what connecting takes. The advice is personal, we do not publish it.

What you get

For station owners

The station stays yours, and its data work for you and for everyone watching the weather in your area.

The map and a station page

Live on Neverin's map and on a page of its own with charts, before thousands of users.

The archive from day one

Your station's whole archive from the day you connected it, free for the owner.

Statistics

Daily, monthly and yearly summaries and the extremes of your station.

An API key

Your station's data without limits, for scripts, home automation and apps of your own.

All free, for good.

For integrators

The ws.neverin.hr protocol

For station makers and software authors: what our server accepts. The technical reference is in English.

Host

ws.neverin.hr, plain HTTP on port 80 (HTTPS on 443 for software that has it). The station is identified by its key alone, 10 lower-case hexadecimal characters; the Station ID is accepted and ignored. A sample is written once per 10 seconds at most per station; the usual device interval is 16 to 60 seconds, a program's 1 to 5 minutes.

Three ways to send

Neverin names: GET or POST to /update/v1/<key>, or to any path with the key as the parameter key; a POST as a form or as a JSON object of one level; metric units, the names below.
The Weather Underground protocol: the GET your firmware already sends to Wunderground, with ID and PASSWORD=<key>, to any path (an Ecowitt's Customized screen: protocol Wunderground, Path /?).
The Ecowitt protocol: the POST form your firmware sends to ecowitt.net, with every sensor (both pressures, the piezo rain gauge, the extra probes, the batteries), to /update/v1/<key>, or to /data/report/ with the key as the field key or PASSWORD. Imperial fields are converted; the rebranded models' metric spellings (tempc, baromrelhpa, windspeedkmh, dailyrainmm) are read too.

GET  http://ws.neverin.hr/update/v1/<key>?temp=14.2&rh=81&baro_rel=1016.4&wspeed=2.5&wdir=230&precip_day=3.4
POST http://ws.neverin.hr/update/v1/<key>        {"temp": 14.2, "rh": 81, "time": "2026-11-07T12:00:00Z"}
GET  http://ws.neverin.hr/weatherstation/updateweatherstation.php?ID=<station id>&PASSWORD=<key>&tempf=57.6&humidity=81&baromin=30.01&dailyrainin=0.13
POST http://ws.neverin.hr/data/report/           PASSKEY=...&key=<key>&tempf=57.6&humidity=81&baromrelin=30.01&baromabsin=29.63&yrain_piezo=12.3 ...

Parameters of the Neverin names

Required: the key and at least one measurement. Everything else is optional. A parameter the receiver does not know is kept beside the sample and shown to the owner, so a new sensor needs no change on your side.

Parameter	Unit	Meaning
`temp`	°C	air temperature
`rh`	%	relative humidity
`baro_rel`	hPa	sea-level (relative) pressure
`baro_abs`	hPa	station (absolute) pressure; the relative is computed from it where both come
`wspeed`	m/s	instant wind speed; the slot's mean and gust are made from it where none come
`wavg`	m/s	mean wind speed
`wgust`	m/s	wind gust
`wdir`	°	wind direction, 0 to 360
`precip`	mm	rain since the previous sample
`precip_total, precip_year, precip_month, precip_day`	mm	a rain counter instead: the first kind present wins; resets are handled
`uv`		UV index
`solar`	W/m²	solar radiation
`sea_temp`	°C	sea temperature
`snow_depth`	cm	snow depth
`pm1, pm2p5, pm10`	µg/m³	particulate matter
`soil_temp_1 to soil_temp_6`	°C	soil temperatures by sensor
`soil_vwc_1 to soil_vwc_4`	%	soil volumetric water content by sensor
`leaf_wet_1, leaf_wet_2`		leaf wetness by sensor
`time`	UTC	the sample's time, ISO 8601 or Unix seconds; without it, the arrival

Time

A sample is timed at its arrival unless it carries time (UTC, ISO 8601 such as 2026-11-07T12:00:00Z, or Unix seconds), which is honoured within 5 minutes ahead of the arrival and 3 hours behind it. The Weather Underground protocol's dateutc is read only for stations whose software clock we have checked; send every 16 to 60 seconds and the arrival is as good.

Answers

JSON. 200 with "stored": true and the fields read; 200 with "stored": false within 10 seconds of the last sample; 400 NO_VALUES when nothing is a known measurement; 401 STATION_KEY_MISSING or STATION_KEY_INVALID; 403 STATION_DISABLED or STATION_REJECTED. Devices need only the status.

How a station gets its key

The owner adds the station in their Neverin profile under My stations and gets the key and the Station ID at once, with the exact settings for the device; the data flow from the first minute, and we approve the station as soon as we can after the first data arrive. A built-in "Neverin" entry in your firmware or software needs two fields, Station ID and Key, and either of the shapes above.

Test credentials, a logo and any question for an integration: [email protected].

Frequently asked questions

Is it free?

Yes. Connecting, the station page, your station's archive and statistics and the API for its data are free.

How long until the station appears?

The data appear on your card in the profile within two minutes after the device starts sending. We review the station by hand and publish it on the map as soon as we can after the first data arrive; we let you know by e-mail.

Can I change the position or the name later?

A station is fixed once submitted, since its position feeds the map, the archive and the verification of forecasts. Ask for small corrections through the contact form; add a relocated station as a new one.

Who sees my data and position?

The station is shown on the map and on its page at the exact position you entered; the last 30 days are public, the whole archive is yours. If you do not want a public position, tell us before you submit. A station's data are not personal data.

My device already sends to Home Assistant or Windy.

Ecowitt devices have one Customized slot only. Choose Neverin, or feed both through a relay (FOSHKplugin, WeeWX) that receives from the device and forwards.

Ready?

A few minutes of work, and your station is part of a network the whole region watches.

Add a station in the profile Create an account and add a station

Unlock Neverin Premium