Verbinden Sie Ihre Station mit Neverin

Host

ws.neverin.hr, plain HTTP on port 80 (HTTPS on 443 for software that has it). The station is identified by its key alone, 10 lower-case hexadecimal characters; the Station ID is accepted and ignored. A sample is written once per 10 seconds at most per station; the usual device interval is 16 to 60 seconds, a program's 1 to 5 minutes.

Three ways to send

1. Neverin names: GET or POST to /update/v1/<key>, or to any path with the key as the parameter key; a POST as a form or as a JSON object of one level; metric units, the names below.
2. The Weather Underground protocol: the GET your firmware already sends to Wunderground, with ID and PASSWORD=<key>, to any path (an Ecowitt's Customized screen: protocol Wunderground, Path /?).
3. The Ecowitt protocol: the POST form your firmware sends to ecowitt.net, with every sensor (both pressures, the piezo rain gauge, the extra probes, the batteries), to /update/v1/<key>, or to /data/report/ with the key as the field key or PASSWORD. Imperial fields are converted; the rebranded models' metric spellings (tempc, baromrelhpa, windspeedkmh, dailyrainmm) are read too.

GET  http://ws.neverin.hr/update/v1/<key>?temp=14.2&rh=81&baro_rel=1016.4&wspeed=2.5&wdir=230&precip_day=3.4
POST http://ws.neverin.hr/update/v1/<key>        {"temp": 14.2, "rh": 81, "time": "2026-11-07T12:00:00Z"}
GET  http://ws.neverin.hr/weatherstation/updateweatherstation.php?ID=<station id>&PASSWORD=<key>&tempf=57.6&humidity=81&baromin=30.01&dailyrainin=0.13
POST http://ws.neverin.hr/data/report/           PASSKEY=...&key=<key>&tempf=57.6&humidity=81&baromrelin=30.01&baromabsin=29.63&yrain_piezo=12.3 ...

Parameters of the Neverin names

Required: the key and at least one measurement. Everything else is optional. A parameter the receiver does not know is kept beside the sample and shown to the owner, so a new sensor needs no change on your side.