Připojte svou stanici k Neverinu

Host

ws.neverin.hr, plain HTTP on port 80 (HTTPS on 443 for software that has it). The station is identified by its key alone, 10 lower-case hexadecimal characters; the Station ID is accepted and ignored. A sample is written once per 10 seconds at most per station; the usual device interval is 16 to 60 seconds, a program's 1 to 5 minutes.

Three ways to send

1. Neverin names: GET or POST to /update/v1/<key>, or to any path with the key as the parameter key; a POST as a form or as a JSON object of one level; metric units, the names below.
2. The Weather Underground protocol: the GET your firmware already sends to Wunderground, with ID and PASSWORD=<key>, to any path (an Ecowitt's Customized screen: protocol Wunderground, Path /?).
3. The Ecowitt protocol: the POST form your firmware sends to ecowitt.net, with every sensor (both pressures, the piezo rain gauge, the extra probes, the batteries), to /update/v1/<key>, or to /data/report/ with the key as the field key or PASSWORD. Imperial fields are converted; the rebranded models' metric spellings (tempc, baromrelhpa, windspeedkmh, dailyrainmm) are read too.

GET  http://ws.neverin.hr/update/v1/<key>?temp=14.2&rh=81&baro_rel=1016.4&wspeed=2.5&wdir=230&precip_day=3.4
POST http://ws.neverin.hr/update/v1/<key>        {"temp": 14.2, "rh": 81, "time": "2026-11-07T12:00:00Z"}
GET  http://ws.neverin.hr/weatherstation/updateweatherstation.php?ID=<station id>&PASSWORD=<key>&tempf=57.6&humidity=81&baromin=30.01&dailyrainin=0.13
POST http://ws.neverin.hr/data/report/           PASSKEY=...&key=<key>&tempf=57.6&humidity=81&baromrelin=30.01&baromabsin=29.63&yrain_piezo=12.3 ...

Parameters of the Neverin names

Required: the key and at least one measurement. Everything else is optional. A parameter the receiver does not know is kept beside the sample and shown to the owner, so a new sensor needs no change on your side.